Silhouette Cameo 4 users here is some great news!

If you are in the market for a Silhouette Cameo 4 and wondering if your Chomas Creations tools will work with the machine there is great news!  The Cameo 4 comes with an adaptor to fit your engraver and precision tip.  It will not fit the adjustable pen holder though.  More to come when I get my hands on the machine.
Thanks Melissa from Silhouette School for this great blog post...
Silhouette School Blog

Like what you see? Leave a comment to let me know! Thanks Amy Chomas

Troubleshooting: Maker engraver & precision tip not detected

This will work for both the Cricut Maker and Explore.

The Chomas Creations engraving tip always goes on the right side in place of the blade as shown in the picture. **Make sure you set your project to CUT.** DO NOT set your project to score or engrave as this will not work. When you send your project to be engraved make sure that you choose a fine point blade item for your project. I use the cardstock setting and I change the pressure that and use a mulitcut if necessary. 
Notice it says no tool is required in clamp A. If it is saying you need a tool in clamp A you need to change to a different setting (it needs to be set to CUT). If it is saying it can not detect the tool in slot B you need to change to a different material.
The Chomas Creations engraver and precision tip will work in the Maker with the proper settings chosen, as shown below and listed above. If you are still having issues reach out to me! amychomas@amychomas.com

Like what you see? Leave a comment to let me know! Thanks Amy