Since none of the old Chomas Creations tools fit into the new Cricut Maker, Chomas Creations has designed new ones special for the machine.
In case you haven't heard, there is more pressure for the cuts on the Maker for the blade side which is very exciting for the Chomas Creations engraving tip in this machine. Look at some of the things I have played around with!
A Chomas Creations adjustable marker holder which will hold up to 1/2 inch is also going to be available. This will fit any marker up to 1/2 inch but most markers will not be centered in the holder. The Sharpie marker is the biggest marker that I have found that fits. These are neon :)
The Chomas Creations adjustable pen holder is 3/8 inch in diameter and will center most gel pens (that don't have squishy grips). These are Gelly Roll gel pens and have a metallic look to them!
Notice the adjustable marker and pen holder both go in place of the plastic piece on the left side of the Maker. To remove the piece you undo the clamp and push on the bottom while you pull on the top and it will release. Slide in the adjustable holder and close the clamp. Add a popcycle stick under the holder to adjust the height of the pen or marker and you are good to draw!
Like what you see? Leave a comment to let me know! Thanks Amy Chomas
What material setting did you use for the dog tags for the Cricut Maker precision tip?
ReplyDeleteHow do you get your engraver tip to fit in clamp A on the cricut maker? It just falls through on mine. I cannot change the machine to allow me to use it in clamp b, as your instructions state.
ReplyDeleteHaving the same issue with no solution??
DeleteMe too...what setting??
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteSame here! Only fits in slot B! How can we change the machine to use B instead of A?
ReplyDeleteYou need to set the machine to cut. If you have the machine set to score or engrave it will give you issues. Once you set it to cut it will work.
ReplyDelete